Shenzhen Wardmay Technology Co., Limited
How to Install A Solar Wifi Camera System?
The solar monitoring system is mainly composed of a camera, a solar panel, a controller, and a battery. The installation steps of the traditional solar camera monitoring system are mainly divided into the following steps:
It is necessary to provide power to the front-end camera equipment through wired means such as a solar array, a controller, a battery pack, an inverter, and a switch. Installation is complicated, there are many steps, wiring is required, and maintenance is troublesome after a problem occurs. Many monitoring systems installed on both sides of the expressway have become furnishings.
With the development of science and technology and the maturity of the Internet of Things technology, the installation of solar camera systems is no longer so cumbersome. By inserting a mobile phone traffic card and accessing the 3G / 4G network, real-time image transmission can be achieved, which means that through the Internet of Things technology, the entire solar camera project no longer requires tedious wiring and layout of the back-end computer room. In addition, the current solar camera monitoring system uses an independent small solar system to supply power, which not only solves the problem of large engineering workload such as wiring, but also avoids the problem of all cameras stopping working due to system power shortage.
Although the traditional split solar camera reduces the trouble of wiring, because the lead-acid battery is installed underground in the ground, the installation and maintenance of the entire system is also troublesome. Generally, solar monitoring uses two transmission modes: one is a microwave network based on a wireless bridge, and the other is based on the height of a wireless operator's 3G / 4G network. The advantage is a one-time investment without subsequent costs. The past development of using 3G / 4G cameras ushered in the spring.
Today's 3G / 4G camera dedicated module, the module is directly installed in the camera, the transmission is stable, and the response speed is fast. In order to simplify the installation steps for customers, the current solar camera system also adopts an integrated design. Solar panel, controller and battery are all integrated into one. The customer only needs to install the sleeve of the camera on the bracket, then connect the power cord of the solar system to the camera, and turn on the switch on the solar system to complete the installation of the complete set of equipment. No trenching or wiring is required, and no technician guidance is required. The whole project has low cost and simple maintenance. I believe that in the near future, solar cameras will bring great convenience to people's outdoor security monitoring.